 | | DIN EN ISO 9001 | | Certificate after DIN EN ISO 9001:2008 Proof of implementation and compliance of an Quality Management System for the scope R&D, production, sales and application of corrosion-resistant linings and coatings as well as systems, apparatus and equipment for the industrial corrosion protection |
 | | | | |
 | | SCC** | | Certificate after the implementation of a safety management system in conformity with the guiding principles SCC**:2006 (general certification). The Certificate is valid for: Sales, service and application of industrial floorings, vessels and apparatus linings, construction of apparatus, vessels and pipings, transport vessels, in industrial plants |
| | | | |
 | | PED 97/23/EG
Annex III, Module
H/H1 | | Certificate after the Pressure Equipment Directive 97/23/EG Annex III, Module H/H1 Proof of implementation and compliance of an Quality Management System for the scope Design, Development, Manufacture and Sales of Pressure Vessels and Piping |
| | | | |
 | | PED 97/23/EG
Annex I,
Paragraph 4.3 | | Certificate after the Pressure Equipment Directive 97/23/EG Annex I, Paragraph 4.3
Proof of implementation and compliance of an Quality Assurance System for the scope of Pipes and Fittings made of fibre glass reinforced plastics with or without thermoplastic liners or made of KERA® materials (SP 21- / FRP; SP 30) |
| | | | |
| | | | |
 | | DIN EN ISO 3834-3 | | Certificate after DIN EN ISO 3834-3 Proof of compliance of technical welding Quality requirements for technical welding activities and nondestructive testing |
| | | | |
| | AD-Data sheet HP0 | | Certificate of compliance of important following premises: Installations for appropriate production and testing, Quality assurance and competent supervisory- and testing employees |
 | | KTA 1401 | | Proof of qualification for the system- and product-related Quality assurance for Planning, Manufacture, Application and Service of apparatus, pipes, fittings with corrosion protection lining, coatings, rubber coatings, acid-proof brick linings resp. platings in nuclear plants |
| | | | |
| | | | |
| | | | |
| | WHG | | Certificate after Water Resources Act (WHG) § 19 I
Proof of acceptance as specialist according to § 19I WHG for the following activities: Coatings, Rubber coatings and linings of vessels, piping, retention ponds, seal faces, as well as Attach, Positioning, Maintain and Recondition of vessels and piping consists of thermoplastic and thermosetting plastics |
| | | | |
| | Particular material
appraisal after PED
Annex I No. 4.2b | | Certificate after Pressure Equipment Directive 97/23/EG Annex I, No. 4.2b Proof of qualification of SP21-/ FRP and SP30 for the production of pressure equipment |
| | | | |
| | Particular material
appraisal after PED
Annex I No. 4.2b | | Certificate after Pressure Equipment Directive 97/23/EG Annex I, No. 4.2b
Proof of qualification of mixed laminates with
reciprocally glass reinforcement of mat and cloth and wrapping laminate for the production of pressure
equipment |
| | | | |
| | Particular material
appraisal after PED
Annex I No. 4.2b | | Certificate after Pressure Equipment Directive 97/23/EG Annex I, No. 4.2b
Proof of qualification of KERAVERIN® PTFE_M/V3 for the production of pressure equipment |
| | | | |
